元明粉安全技术说明书(英文版)
Material Safety Data Sheet
SECTION ONE PRODUCT INDENTIFICATION
▲ Name: Sodium Sulphate Anhydrous
▲ Chemical Formula: Na2SO4
▲ State: White free flow powder
SECTION TWO HAZARDS INDENTIFICATION
▲ Health effects: No adverse effects expected. It can be applied for pharmic ingredient.
▲ Environment effects: No.
SECTION THREE PERSONAL PROTECTION AND FIRST AID
▲ Personal Protection
Protective Gloves: Chemical resistant gloves.
Eye Protection: Appropriate goggles.
Inhalation: Purifying respirator
In case of repeated or prolonged skin contact, protective clothing should be worn.
▲ First Aid
● Skin-contact: Wash skin with water
● Eye-contact: Flush with water for at least 15 min. Call physician if symptoms occur.
● Inhalation: Remove to fresh air. Obtain medical attention in all cases.
SECTION FOUR FIRE FIGHTING
▲ This product is not inflammable and explosive. Needn’t fire fighting measures.
SECTION FIVE ACCIDENTAL RELEASE MEASURES
▲ This product is packed in PP bags. It only need to clean up if release.
▲ Environmental Precautions: Do not discharge sodium sulphate in to waterways and sewers.
SECTION SIX HANDLING AND STORAGE
▲ Handling & Storage Precautions.
● Prevent exposure to high temperature and flames.
● Prevent exposure to strong acid materials
● Keep container tightly sealed to prevent moisture/vapor exchange.
● Store in a clean and dry area.
SECTION SEVEN PHYSICAL & CHEMICAL PROPERTIES
NO. Properties Unit Standard Test Method
1. Appearance White crystal powder Inspection as
2. Texture Free flowing Standard
3. Reflectance@460nm 90 Min. USE BaSO4 calibrate
4. Bulk Density g/cc 1.1-1.6 UMAB.Vl.a.3.1/2
5.Sodium sulphate % 99.0Min. UMAB.11.A.7
6.Moisture % 0.5Max UMAB.11A.3.A
7.Water Insoluble % 0.25Max UMAB.11.A.6
8.PH(10% as solution) 7-9.6 umba.11.a.4
9. Particle size at 60# % 5 max retention
10. Mean Particle size Rosin Rambler N Value
>500 micron % 0.5max
>200 micron ppm not specified
11. Fe ppm 20 Max PLASMA EMISSION/AAS
12. Chromium ppm 10 Max PLASMA EMISSION/AAS
13. Cobalt ppm 5 Max PLASMA EMISSION/AAS
14. Nickel ppm 5 Max PLASMA EMISSION/AAS
15. Arsenic ppm 10 Max PLASMA EMISSION/AAS
16. Titanium ppm 5 Max PLASMA EMISSION/AAS
17. Zinc % 1 Max PLASMA EMISSION/AAS
18. Chloride(as NACI) % 0.3Max umab.11.a.8.a/b Weight on dry basis洪泽县达力化工
19. Microbiological Not applicable
SECTION EIGTH STABILITY AND REACTIVITY
▲ This product is safety, stability and soluble in water easily.
SECTION NINE TOXICOLOGICAL INFORMATION
▲ This Product is not toxicity.
SECTION TEN ECOLOGICAL INFORMATION
▲ This product is not pollution, it will soluble after water flush.
SECTION ELEVEN TRANSPORTATION
▲ Caution: Tight sealing with storage container for preventing from dust pollution
Store in well-vent, cool and dry area.
SECTION TWELVE DISPOSAL CONSIDERATION
▲ Dispose this product in accordance with local regulation and laws.
▲ The product in accordance with China sate standard GB/T 6009-2003 and ISO 9001:2000 quality systems.
SECTION THIRTEEN COMPOSITION/INFORMATION ON INGREDIENTS
▲1. Appearance White crystal powder Inspection as
▲2. Texture Free flowing Standard
▲3. Reflectance@460nm 90 Min. USE BaSO4 calibrate
▲4. Bulk Density g/cc 1.1-1.6 UMAB.Vl.a.3.1/2
▲5.Sodium sulphate % 99.0Min. UMAB.11.A.7
▲6.Moisture % 0.5Max UMAB.11A.3.A
▲7.Water Insoluble % 0.25Max UMAB.11.A.6
SECTION FOURTEEN EXPOSURE CONTROLS/PERSONAL PROTECTION
▲This product is not pollution, it will soluble after water flush
SECTION FIFTEEN REGULATORY INFORMATION
▲GB/T6009-2003 I first grade one type
SECTION SIXTEEN OTHER INFORMATION
▲No other information at presnt .
FORM:www.dsmake.cn